Справочник Пользователя для jWIN JX-CD561

www.jWIN.com 

 

1. Press 

the 

PROGRAM BUTTON once during the stop mode. 

The “PROGRAM” indication and the number of Program to be 
memorized starting from the first program “P01” will be shown 
on the LCD and blink continuously.  

 
2. Press 

the 

SKIP/SEARCH FORWARD () or BACKWARD () BUTTON to select your 

desired audio track. The LCD DISPLAY will show the appropriate track number.   

 
3. Press 

the 

PROGRAM BUTTON to store the track in memory. 

 
4. 

Repeat above procedure (from step 2 to step 3) until all desired tracks have been 
programmed. 

Note: Whenever SKIP/SEARCH FORWARD () or 
BACKWARD () BUTTON is pressed, it will always show the 
last programmed track first to recall your memory. The total of 
20 tracks can be stored in memory. After complete 
programming, LCD DISPLAY will show “PROGRAM – – –” and blink continuously. 

 
5. 

To start the programmed playback, press the PLAY/PAUSE 
BUTTON (

X||) once. The play “X” indication, “PROGRAM” 

indication and the track number will be shown on the LCD. 

 
6. 

To check the program you have stored after complete programming: 

 

a. Press 

the 

PROGRAM BUTTON once during the stop mode. The LCD DISPLAY will 

show “P01” and blink continuously.  
 

b. Press 

the 

SKIP/SEARCH FORWARD () or BACKWARD () BUTTON once. The 

LCD DISPLAY will show the first programmed track number.  

 

c. Press 

the 

PROGRAM BUTTON again. The LCD DISPLAY will show “P02” and blink 

continuously.  

 

d. 

Repeat above procedure (from step b to step c) to check all programs being stored. 

 
7. 

To cancel the programmed memory: 

 

a. 

During the stop mode, press the STOP BUTTON (

„) once, or 

 

b. 

Open the CD Door during the stop mode. 

 
The “PROGRAM” Indication will disappear from the LCD DISPLAY. 

 

1. Press 

the 

STOP BUTTON (

„) once when the disc is in either the play or pause mode to 

stop the disc. 

 
2. 

To turn off the unit, slide the FUNCTION SWITCH to the “OFF” position.