Справочник Пользователя для Olympus 142665

Read the following descriptions carefully 
when you use the Ni-MH rechargeable 
batteries.

The rechargeable batteries self-discharge 
while this is not in use. Be sure to charge 
them regularly before use.

The rechargeable batteries are chemical 
products. The rechargeable batteries 
efficiency may fluctuate even when 
operating within the recommended 
temperature range. This is an inherent 
nature of such products.

When operating appliance:
 

0°C - 42°C/ 32°F - 107.6°F

Charging:
 

5°C - 35°C/ 41°F - 95°F

Storage for a long period:
 

–20°C - 30°C/ –4°F - 86°F

Using the rechargeable batteries outside 
the above temperature range may result in 
declining efficiency and shorter battery life. 
In order to prevent battery leakage or rust, 
remove the rechargeable batteries from the 
products when you will not be using them 
for a long time, and store them separately.

•  This recorder is designed to fully charge 

batteries regardless of their energy level. 
However, for best results when charging 
newly purchased rechargeable batteries 
or batteries that have not been used 
for a long time (more than one month), 
It is recommended to fully charge the 
batteries then discharge repeatedly for 2 
to 3 times.

•  Do not charge the recorder with the USB 

hub connected.

•  Insert the supplied rechargeable battery 

and set [Battery] to [Ni-MH]. If [Battery] 
is set to [Alkaline], you cannot recharge 
(

☞ P.16, P.64).

•  You cannot charge when [

ø]*1 or [√]*2

blinks. Charge the batteries at a 
temperature in the range of 5°C to 35°C 
(41°F to 95°F).
*1 [

ø]:  When the surrounding 

temperature is low.

*2 [

√]:  When the surrounding 

temperature is high.

•  When using time becomes notably short 

even after the batteries are fully charged, 
replace them with new ones.

•  Be sure to push the USB connector all the 

way in. Otherwise, the recorder may not 
operate properly.

•  Be sure to use the included dedicated 

USB cable. If any other company’s cable 
is used, it may lead to malfunction of the 
recorder. Also, never use this dedicated 
cable with any other company’s products.

• Selecting 

[Composite] in the USB 

connection settings will prevent the 
recorder to charge via USB. Select 
[Storage class] in the USB connection 
settings if you would like to charge 
(

☞ P.76).

•  In case you would like to charge using 

the [Composite] setting, select [Option] 
in the USB connection settings, then 
connect the USB cable to the recorder. 
Select [AC adapter] at the [USB Connect] 
display to start charging (

☞ P.76).