Справочник Пользователя для HP (Hewlett-Packard) 4.1.X

Скачать
Страница из 307
Introducing HP Web Tools
34
Web Tools in Secure Mode
The Security feature may change your ability to access Web Tools functionality 
when Secure Mode is enabled. For more information on the Security feature see 
the HP StorageWorks Secure Fabric OS Version 1.0 User Guide
Web Tools Access and the HTTP_POLICY
When Secure Mode is enabled, access to the Web Tools interface is controlled by 
the HTTP_POLICY. If Secure Mode is enabled and an HTTP_POLICY has been 
defined, your workstation IP address must be included in this policy or you will 
not have access to Web Tools for any switch in the fabric. If your workstation IP is 
not included in this policy, the interface disabled page will display when you 
attempt to access a switch. 
Primary FCS Only Functionality
The following Web Tools functionality is reserved for the Primary Fabric 
Configuration Server (FCS) when Secure Mode is enabled:
Zoning Administration is only allowed from the Primary FCS switch when 
Secure Mode is enabled. For all other switches in a secure fabric, the Zoning 
Button is disabled. 
SNMP Access Control Lists and the SNMP Community Strings can only be 
modified from the Primary FCS switch when Secure Mode is enabled. For 
Non-FCS switches, you can view the SNMP Community Strings but they are 
read only, and the SNMP Access Control Lists are not displayed. 
Disabled Functionality
Telnet access to a switch and the Telnet Button in Web Tools are both disabled 
when Secure Mode is enabled for a fabric. You must use sectelnet or SSH to 
access the Fabric OS command line interface in a secure fabric. These capabilities 
are not accessible from Web Tools.