Справочник Пользователя для IBM SAN384B
v
Improved cable management using two vertical cable management finger
assemblies
assemblies
v
Constant intake and FRU temperature monitoring
v
Redundant AC primary power connections to ensure high availability. Each
power supply has its own connector
power supply has its own connector
Note:
Airflow in the SAN384B is from the non-port (non-cable) side to the left side
of the chassis. With the port-side exhaust kit installed (see Figure 2 on page
4, the air flows out the vent on the port side of the chassis.
of the chassis. With the port-side exhaust kit installed (see Figure 2 on page
4, the air flows out the vent on the port side of the chassis.
Figure 1 shows a sample configuration of the port side of the SAN384B with four
FC8-48 port blades installed.
FC8-48 port blades installed.
1
FC8-48 port blade (example, 4x)
3
Control processor blade (CP8) (2x)
2
Core switch blade (CR4S-8) (2x)
4
Exhaust vent
Figure 2 on page 4 shows the SAN384B with the port-side exhaust kit installed
over the chassis exhaust vent (sample configuration). The exhaust is routed from
the chassis exhaust vent through the port-side exhaust kit. The exhaust exits
through the vent grill below the chassis.
over the chassis exhaust vent (sample configuration). The exhaust is routed from
the chassis exhaust vent through the port-side exhaust kit. The exhaust exits
through the vent grill below the chassis.
1
3
4
2
384b001
Figure 1. Port side of the SAN384B (sample configuration)
Chapter 1. Introduction
3