Справочник Пользователя для Pure Digital 200i

10

Preparing Contour to use 
AirPlay with an Ethernet cable

1.   Connect an Ethernet cable from 

the Ethernet port on the back of 
Contour to your router. 

2.   Insert the connector of the mains 

power adapter into the DC In 
socket on the rear of Contour.

3.   Plug in to the mains supply.

4.   A network connection between your router and Contour will then be established automatically. 

When the red Status LED on the front has stopped flashing, Contour is in Standby. 

5.   Press Standby on Contour or the remote control until Contour has AirPlay selected as its 

input source. If the Status LED is steady white then AirPlay has been setup successfully. If the 
Status LED is flashing white, there is a problem with Contour’s network connection.

      Note: See “Help” on page 24 for help with troubleshooting Contour network connectivity  
      issues.

6.   Contour is now set up to use AirPlay with a wired connection. No further configuration is 

required. See page 11.