Справочник Пользователя для Jensen MR-720

1.  Plug the rechargeable battery into the socket as describe above if required
2.  Set the POWER SOURCE Switch to the “PWR OFF” position.
3.  Plug the AC adaptor into a standard 120VAC household outlet.

CAUTION:  TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.

4. Connect the adaptor’s plug to the DC IN Jack (#24) on the back of the unit.

The CHARGE Indicator (#3) will light.

5. After charging the unit for 12 hours, unplug the adaptor to avoid over-

charging the battery pack. The CHARGE Indicator will go off.

IMPORTANT: DO NOT CHARGE BATTERY CONTINUOUSLY FOR 16 HOURS

OR MORE. DOING SO CAN CAUSE THE PERFORMANCE OF
THE RECHARGEABLE BATTERY TO DETERIORATE.

DISPOSAL OF LITHIUM ION BATTERY

Bring the Lithium Ion batteries to an RBRC participating retailer. To find a retailer
near you visit: www.rbrc.org
or call: 1-800-8-battery

Lithium Ion batteries can also be discarded with household trash.

TO SET OR RESET CURRENT TIME

1. Setting the POWER SOURCE Switch (#7) to “PWR OFF”.
2. Press and hold the TIME SET Button (#18), press HOUR (#15) to set hour

and MINUTE (#16) to set minute.

NOTE: When setting the time, make sure to correctly set for AM or PM in order

for the Alarm to function properly.

TO SET OR RESET ALARM TIME

1. Set the POWER SOURCE Switch (#7) to “PWR OFF”.
2. Press and hold the ALARM SET Button (#19), press the HOUR Button (#15)

to set the hour and the MINUTE Button (#16) to set the minutes.

3. To view the alarm time, press the ALARM SET Button (# 19) once.

NOTE: When setting the time, make sure to correctly set for AM or PM in order

for the Alarm to function properly.

TO ACTIVATE THE ALARM

1. Set the current and alarm time as describe in the above procedures.
2. Turn off the radio by sliding the POWER SOURCE Switch (#7) to the

“POWER OFF” position

3. Press the ALARM Button (#17) once. The Alarm Indicator, “ “, will appear

in the top right corner of the display.

TO SHUT THE ALARM OFF

1. When the alarm sounds, press the ALARM Button (#17) once. The alarm

will turn off and automatically reset for the next day. (Alarm icon will keep
showing in the LCD display.)

2. Press the ALARM Button twice when the alarm sounds and the alarm will

turn off and will not sound again when the alarm time is reached in the
future. (Alarm icon will disappear in the LCD display.)

BACK LIGHT OPERATION

Press the BACK LIGHT Button (#6) once and the back light will turn on for 2
seconds and turn off automatically.

RADIO OPERATION

LISTENING TO AM, FM, OR WEATHER BAND

1. Set the POWER SOURCE Switch (#7) to (Rechargeable Battery)

or (Dry Cell Battery) position depending on the power source you
choose to use.

2. Select AM, FM or WB (Weather Band) with the BAND SELECT switch (#1).
3. Tune to your favorite AM or FM stations with the TUNING knob (#9). The

current radio station frequency will appear on the LCD Display.

4. During AM or FM reception, to view the time simply press the

RADIO/CLOCK

(# 20) Button once.