Справочник Пользователя для Fluke DTX-NSM
DTX-NSM Instruction Sheet/English
Page 3
Verifying Network Connectivity
The network connectivity test tells you if a network jack is connected to the
switch or hub. The test also provides details about the link's configuration and
includes a ping function for verifying connectivity to stations on the network.
switch or hub. The test also provides details about the link's configuration and
includes a ping function for verifying connectivity to stations on the network.
Setting Up for the Connectivity Test
1
Turn the rotary switch to SETUP, select Network Settings > IP Address
Assignment; then select one of the following:
Assignment; then select one of the following:
•
Select DHCP to have the network's server assign IP addresses.
•
Select Static to assign addresses manually.
In Static mode, a second tab appears on the Network Settings screen.
On this tab, enter the DTX Address, Subnet Mask, and Gateway
(optional) and DNS Server (optional) addresses. These addresses are
typically available from a network installer, administrator, technician, or
from network documentation.
On this tab, enter the DTX Address, Subnet Mask, and Gateway
(optional) and DNS Server (optional) addresses. These addresses are
typically available from a network installer, administrator, technician, or
from network documentation.
2
Use one of the following methods to enter ping addresses (optional):
•
In the latest version of LinkWare software, select Utilities > DTX Utilities
> Ping Target List to create and download an address list. See the
LinkWare online help for details.
LinkWare online help for details.
•
On the tester's Network Settings tab, select Target Addresses. Press
J Create; then enter the Name and IP Address of a device you want
to ping.
to ping.