Справочник Пользователя для American Dryer Corp. AD-464
450260-1
www.amdry.com
39
Proximity Switch Replacement
1. Discontinue electrical service to the dryer.
2. Remove the screws securing the junction box cover.
3. Mark and identify the wires that will be removed for proper
2. Remove the screws securing the junction box cover.
3. Mark and identify the wires that will be removed for proper
reinstallation.
4. Disconnect the two (2) leads of the defective proximity
switch.
5. Remove the proximity switch from the cut out.
6. Replace the proximity switch.
7. Reverse Step #4 through Step #2.
8. Reestablish electrical service to the dryer.
6. Replace the proximity switch.
7. Reverse Step #4 through Step #2.
8. Reestablish electrical service to the dryer.
Lint Chamber Sail Switch
The lint chamber sail switch utilized in the dryer is used to
insure that there is proper air flow through the dryer. If there
is a problem with this sail switch a "SAIL SWITCH" error
message will be displayed via the L.E.D. (light emitting diode)
on the display unit.
Probable Causes for a "SAIL SWITCH" Error
Message
Clogged lint screen.
Obstructed exhaust.
Insufficient make-up air.
Possible Solutions
Perform preventive maintenance and lint screen cleaning
procedures.
Clean entire exhaust system.
MAN 0440
Safety Devices _______________________
The dryer is equipped with numerous safety devices to ensure
that the dryer operates safely. The chart on the following
page lists each device with its location, function, computer
display message, and result of tripping.