Справочник Пользователя для Haier GDZ5-1C

• To connect a qualified electrical installer.

• To be sure that the electrical connection is adequate and in 

conformance with CAN1-B149 (.1 or .2) installation codes and/or 
local codes.

• A 4 wire, single phase, 115/230-volt, 60-Hz., AC-only electrical 

supply is required on a separate 30-amp circuit, fused on both sides
of the line.  A time-delay fuse or circuit breaker is recommended.  
Connect to an individual branch circuit.

• This dryer is equipped with a CSA International Certified Power Cord

intended to be plugged into a standard 14-30R wall receptacle.  
The cord is 5 ft (1.52 m) in length.  Be sure wall receptacle is within 
reach of dryer’s final location.

4-wire receptacle 14-30R

If using a replacement power supply cord, it is recommended that you use
Power Supply Cord Replacement.  For further infromation, please reference the
service numbers located in the “Assistance or Service” section of this manual.

Electrical Shock Hazard

Plug into a grounded 4 prong outlet.

Failure to do so can result in death or electrical shock.