Справочник Пользователя для Mitsubishi Electronics A8GT-J61BT15

3 - 1                                                                                                                                                       3 - 1

MELSEC-GOT

3   SPECIFICATIONS

3.  SPECIFICATIONS

This chapter provides the general and performance specifications and other

information of the A8GT-J61BT15.

3.1  General Specifications

The general specifications of the A8GT-J61BT15 changes according to the GOT used.

Refer to the user's manual of the GOT used.

3.2  Performance Specifications

The following table lists the performance specifications of the A8GT-J61BT15.

Item

Specifications

CC-Link station type

Remote device station

Number of stations occupied

May be selected between 2 and 4.

2 station: RX/RY 64 points each

1, RW write area 8 points each/read area all area

4 stations: RX/RY 128 points each

1, RW write area 16 points each /read area all area

Monitor device

Write from GOT:RX,RWs assigned to the GOT (depending on the number of stations occupied(Refer

to upper))

Resd to GOT

: RX,RWs assigned to the GOT (depending on the number of stations

occupied(Refer to upper))

Transmission speed

156kbps/625kbps/2.5Mbps/5Mbps/10Mbps

Max. transmission distance

Depends on the transmission speed.

Max. number of modules
connected

32 (when two stations are selected)

The max. number of modules connected depends on the configuration of the CC-Link system to be used.
For more details on the max. number of modules connected, refer to the CC-Link System Master-
Local Module User’s Manual.

Connection cable

CC-Link dedicated cable

Terminal block

8-pin terminal block (M3.5

8 screws)

Applicable cable size

0.75mm

2

 to 2.00mm

2

Applicable crimping terminal

RAV1.25-3, RAV2-3.5 (conforming to JIS C2805)

Current consumption

100mA

Outline dimensions

99mm(3.9inch)(H)

149mm(5.85inch)(W) 

34mm(1.34 inch)(D)

Weight

0.20kg (0.44lb)

Compatible software package

2

GOT-A900 Series

SW0D5C-GTWORKS-E  Version A or later
SW0D5C-GOTRE-PACK  Version A or later

GOT800 Series

SW3NIW-A8GOTP  Version A or later
SW3NIW-A8SYSP  Version A or later
SW3NIW-A8GMDP

1

Each of the I/O signals (RX, RY) occupies 16 points of a system area within device points.

For more details on the I/O signals, refer to Section 4.3.1.

2

Be sure to use a software package that supports the GOT to be used.

For more information on the software packages that support the GOT, refer to the user’s manual of the GOT to be used.

 3