Справочник Пользователя для Haier RDE350AW
6
INSTALLATION INSTRUCTIONS
WARNING
Risk of Fire
Clothes dryer installation must be performed by a qualified installer.
Install the clothes dryer according to the manufacturer's instructions
and local codes.
and local codes.
To reduce the risk of severe injury or death, follow all installation
instructions.
instructions.
TOOLS NEEDED
• Phillips Screwdriver
• Flat-Blade Screwdriver
• Channel-Lock Adjustable Pliers
• ½" Open-End Wrench
• Carpenter’s Level
• Measuring Tape (12 ft. [3.7 m] min.)
For gas installations only:
• Pipe Wrench
• 2 Adjustable Wrenches
ADDITIONAL PARTS REQUIRED
• 4" (10.2 cm) Rigid or Flexible Metal Exhaust Ducting
• Vent Clamps
• Duct Tape
• Power Cord (US Electric Dryer Only)
-
A power supply cord kit must be purchased to meet local electrical codes.
The dryer must use a 3 or 4-wire NEMA 14-30 or 10-30 type SRDT or ST
(as required) power supply cord rated at 120/240 volt AC minimum,
30 amp, with 3 open-end spade lug connectors with upturned ends or
closed loop connectors and marked for use with clothes dryers.
The dryer must use a 3 or 4-wire NEMA 14-30 or 10-30 type SRDT or ST
(as required) power supply cord rated at 120/240 volt AC minimum,
30 amp, with 3 open-end spade lug connectors with upturned ends or
closed loop connectors and marked for use with clothes dryers.
-
UL Listed Strain Relief
• Gas Hookup Parts (Gas Dryer Only)
-
!" NPT Elbow
-
!" NPT Flare Adapter Fitting
-
!" Flexible Gas Connector
-
Pipe-Joint Compound
• Mobile Home Installation Kit (Gas Dryer for Mobile Home Only)