Справочник Пользователя для Barco R5976934
5. The On Screen Display (OSD)
5-16 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.3.3.1 PIP Mode
PIP Mode can be set to off, single, PAP.
When PIP mode is Off, only one source is displayed.
When PIP mode is Single, the source connected to input 1 is the master source and displayed according its set-
tings, whereas the source connected to input 2 is the PIP source and displayed either in Small, Medium or Large
size according the PIP Size selections.
tings, whereas the source connected to input 2 is the PIP source and displayed either in Small, Medium or Large
size according the PIP Size selections.
The position of the PIP source is set using the Vertical and Horizontal adjustment.
PIP Size, Vertical and Horizontal are only enabled if PIP Mode is selected Single.
In case no source is connected to input 2,
Single will result in an empty window with blue borders,
PAP will result in displaying source1 at the left half of the monitor (right half remains
black).
Single will result in an empty window with blue borders,
PAP will result in displaying source1 at the left half of the monitor (right half remains
black).
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the PIP Mode
• Press 5 and 6 to navigate to PIP Mode
• Use the left and right cursor keys to select one
of the options Off, Single, PAP
The current selection is visualized by a white
caption.
The current selection is visualized by a white
caption.
• Use 3 and 4 to select one of the options Off,
Single, PAP
The current selection is visualized by a white cap-
tion.
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
Using the direct access key F2, the selected PIP mode can be toggled between On and Off.
Using the direct access key F3, the PIP master and the PIP source can be toggled.
5.3.3.2 PIP Size
PIP size can be set to small, medium, and large.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the PIP Size
• Press 5 and 6 to navigate to PIP Size
• Use the left and right cursor keys to select one
of the options Small, Medium, Large.
The current selection is visualized by a white
caption.
The current selection is visualized by a white
caption.
• Use 3 and 4 to select one of the options Small,
Medium, Large. The current selection is visualized
by a white caption.
by a white caption.
The selection is applied without any further action.