Справочник Пользователя для Barco R5976934
5. The On Screen Display (OSD)
5-36 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
To select a display parameter; proceed as follows:
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the desired parameter
• Press 5 and 6 to navigate to the desired parame-
ter
• Use the left and right cursor keys to activate
the desired value.
The current selection is visualized by a white
caption.
The current selection is visualized by a white
caption.
• Use 3 and 4 to activate the desired value
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
5.6.1 Set display address
The value can be set in the range from 1 to 255.
If more than one monitor is installed, the monitors can independently be RS232 remote-controlled by means of
their display address.
their display address.
Default monitor address is "1". Allowed addresses are in the range from 1 to 255.
"
1
" is the common address.
A monitor will listen to the commands explicitly sent to his specific address and to commands sent to the com-
mon address.
mon address.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Set display address
• Press 5 and 6 to navigate to Set display address
• Use the left and right cursor keys to in-
crease/decrease the address in steps of 1
The current value is indicated.
The current value is indicated.
• Use 3 and 4 to increase/decrease the address in
steps of 1
The current value is indicated.
The current value is indicated.
The value is applied without any further action.
5.6.2 Baud rate
The value can be set to 115200, 38400, 19200, 9600.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Baud rates
• Press 5 and 6 to navigate to Baud rate
• Use the left and right cursor keys to i select one
of the options 115200, 38400, 19200, 9600.
The current selection is visualized by a white
caption
The current selection is visualized by a white
caption
• Use 3 and 4 to select one of the options 115200,
38400, 19200, 9600.
The current selection is visualized by a white cap-
tion
The current selection is visualized by a white cap-
tion
The value is applied without any further action.