Справочник Пользователя для Canon 14EX
10
Use four size-AA/LR6 batteries.
1
Open the cover.
Slide the battery compartment cover
as shown by the arrow, then flip up
the edge.
as shown by the arrow, then flip up
the edge.
2
Insert the batteries.
Make sure the + and - battery
contacts are properly oriented as
shown in the compartment.
contacts are properly oriented as
shown in the compartment.
3
Close the cover.
Push down the cover and slide it
back.
back.
Recycling Time and Flash Count
Based on a new set of batteries and Canon’s testing standards.
The figures are the same for both flash tubes/heads firing or single tube/head
firing.
firing.
This applies to both the MR-14EX and MT-24EX.
Installing the Batteries
Battery Type
Recycling Time
Flash Count
Size-AA/LR6 alkaline batteries
Approx. 0.1 - 7 sec.
Approx. 120 - 800
Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
batteries, replace all four at one time.
Using size-AA batteries other than the alkaline type (LR6) may cause
improper battery contact due to the irregular shape of the battery
contacts.
improper battery contact due to the irregular shape of the battery
contacts.
Size-AA Ni-MH (HR6) or lithium (FR6) batteries can also be used.
MR14_MT24_01.fm Page 10 Saturday, January 23, 2010 10:44 AM