Справочник Пользователя для Canon 14EX
33
1
Set the MR-14EX or MT-24EX as
the master unit.
the master unit.
Press the <D> button to select
<a>.
<a>.
Press the <f> button to select
<yk>.
<yk>.
X
<w> will be displayed.
Press the <e> button to select a
channel 1 to 4.
channel 1 to 4.
2
Set the slave unit.
Set the same channel as with the
master unit.
master unit.
Set the ID to <
C
>.
As for the setting procedure, refer to
the slave Speedlite’s instruction
manual.
the slave Speedlite’s instruction
manual.
3
Position the slave unit(s).
Face the slave unit C’s sensor toward
the master unit.
the master unit.
Do not put any obstructions between
the master unit and slave unit(s) C.
the master unit and slave unit(s) C.
4
Check that the flash is ready.
When the slave unit(s) C is ready to
fire, the AF-assist beam will blink for 1
sec.
fire, the AF-assist beam will blink for 1
sec.
MR14_MT24_03.fm Page 33 Tuesday, December 20, 2005 4:36 PM