Справочник Пользователя для Polaris PMS 419

98

Idle RPM is preset by the manufacturer. If the engine idle speed is not 
satisfactory, please see your POLARIS dealer for adjustment.

1. Remove both seats. Remove the 

rear service panel. See page 31.

2. Locate the throttle cable adjuster 

at the throttle body.

3. Slide the cable adjuster boot off 

the cable adjuster.

4. Using a 10 mm open-end wrench, 

loosen the adjustment jam nut.

5. Using an 8 mm open-end wrench, 

move the cable adjuster until 1/16" 
to 1/8" (1.5-3 mm) of freeplay is 
achieved at the throttle pedal. See page 97. While adjusting, lightly 
flip the throttle pedal up and down.

6. Tighten the jam nut.

7. Apply a small amount of grease to the inside of the boot and slide it 

over the cable adjuster to its original position.

Boot

Adjuster

Jam Nut