Справочник Пользователя для ARRI 416

•  Screw the work light into the Accessory Rosette.

•  Connect the plug to an “RS” socket.

•  Bend the flexible arm, to bring the work light into the 

desired position. The work light can be turned on and 

off with the ring on the lamp head 

a

. The 

brightness of the work light can be adjusted with the 

mechanical shutter.

HE-4

WL-3

The heated eyecup prevents the eyepiece 

a

 from 

misting-up, e.g. when filming outdoors in cold weather.

•  Pull the normal eyecup off the eyepiece and replace it 

with the heated eyecup.

•  Connect the heated eyecup to the heated eyepiece 

outlet with cable KC-63.

•  Set the heating level with the toggle switch 

a

: 

“LO”: low heat output 

“HI”: higher heat output.

switch