Справочник Пользователя для ARRI 416

When the 416 is not powered by an OBB-2, it is possible 

to set the threshold at which the Low Battery warning is 

triggered. It can be set anywhere between 20.0 and 29.9 

volts.

•  Change from Mode 1 to Mode 3 by pressing the 

“MODE” button twice.

•  Press the “SET“ button. The currently set Low Battery 

warning level is displayed for 3 seconds.

•  To change the level, press the “SEL“ button 3 times to 

select the 2nd voltage digit or 4 times to select the 3rd 

voltage digit. The selected digit will blink.

•  Adjust the blinking digit with the “SET“ button.

•  Once the 2nd and 3rd voltage digits are set as 

required, press the “SEL“ button once to exit the 

adjustment mode.

MODE button

SEL / SET buttons