Справочник Пользователя для ARRI ARRIFLEX 235

Note: 

The upper plate of the bridge plate can be con-

verted for use with Super 35. This ensures that 

the accessories are also exactly adapted to the 

displaced optical center of the Super 35 format. 

See also Chapter 12, Super 35.

•  Fasten the sliding upper plate 

➪ 

 with the two slit 

screws to the camera base. Both cylindrical pins  

➪ 

 

(twist prevention) must glide into the holes.

•  Then screw the base plate onto the wedge plate of the 

tripod and lock onto the tripod head.

•  Slide the camera with the upper plate into the dovetail-

guide of the base plate until the spring-loaded stop pin   

➪ 

 snaps back audibly. The camera’s position 

can then be fixed with the clamping lever.

•  Slide the support rods into the guides and clamp.

•  Equip the camera with the required accessories to 

determine the center of gravity. Loosen the clamping 

lever  

➪ 

, and by sliding the camera on the 

base plate find the optimal position. Then retighten the 

clamping lever.

sliding upper plate

riser plate

screws

cylindrical pins

stop pin

base plate

sliding upper plate

clamping lever