Справочник Пользователя для ARRI ARRIFLEX 235

If the film has not run through the camera completely:

•  Open the camera door.

•  Open the movement by turning the inching knob 

➪ 

 until the mark aligns with the mark on the 

movement and then turn the movement locking lever   

➪ 

 towards the „OPEN“ position.

•  Pull out the film loop sideways from between the 

movement block and the film gate.

•  Bring the loop into the area between the movement 

block and the magazine throat assembly.

•  Swing the movement block forwards again and lock.

•  Hold the magazine firmly with one hand and pull the 

magazine locking lever back with the other.

•  Pull the magazine off upwards.

•  Replace the cover on the camera opening.

If the entire film has run through the camera:

•  Hold the magazine firmly with one hand and pull the 

magazine release lever back with the other.

•  Pull the magazine off upwards.

•  Replace the cover on the camera opening.