Справочник Пользователя для JVC LYT0583-001A
42
EN
CONNECTIONS
Advanced Connections
Connection To A Personal Computer
This camcorder can transfer still images to a PC by using
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
appropriate cable as shown in the illustration.
3
Turn the camcorder’s Power Switch to “
” while
pressing down the Lock Button located on the switch
and turn on the PC.
and turn on the PC.
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
Charger as the power supply instead of the battery pack
(
pg. 7).
●
Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
●
The date/time information cannot be captured into the
PC.
PC.
●
Refer to the instruction manuals of the provided
Software.
Software.
●
Also refer to the manufacturer’s instruction manual for
the DV connector-equipped capture board.
the DV connector-equipped capture board.
To DV
OUT
OUT
To
RS-232C
RS-232C
DV cable**
To DV
connector
connector
PC
connection
cable
(provided)
connection
cable
(provided)
To PC
(DIGITAL
PHOTO)
(DIGITAL
PHOTO)
Power Switch
PC with DV
connector-equipped
capture board
connector-equipped
capture board
PC
Connector
cover*
cover*
Core filter
* When connecting the cable, open this cover.
** Use the DV cable provided with the capture
** Use the DV cable provided with the capture
board.