Справочник Пользователя для JVC GR-D338AH

MasterPage: Start_Right

Selection of a spot metering area enables more 
precise exposure compensation. You can select 
one of the three metering areas on the LCD 
monitor/viewfinder.

Set the Power Switch to “REC”.

Set the recording mode to “

M”. ( pg. 14)

Press BACKLIGHT twice so that the Spot 

Exposure Control indicator “

” appears.

● A spot metering area frame appears at the 

centre of the LCD monitor/viewfinder.

Press 2 or 1 to select the desired spot 

metering area frame.

Press SET.

● Spot Exposure Control is engaged.

● Exposure is adjusted to make the brightness of 

the selected area most appropriate.

To lock the iris
After step 

4, press and hold SET over 2 

seconds. The “

L” indication appears and the iris 

is locked.

To cancel Spot Exposure Control
Press BACKLIGHT once so that the “

” 

indicator disappears.

● You cannot use the Spot Exposure Control at the 

same time with following functions.
● “

16:9” in “WIDE MODE” 

● “STROBE” in “EFFECT” ( pg. 31)

● Digital Zoom ( pg. 18)

● Depending on the shooting location and condition, 

optimum result may not be attained. 

The white balance refers to the correctness of 
colour reproduction under various lighting. If the 
white balance is correct, all other colours will be 
accurately reproduced.
The white balance is usually adjusted 
automatically. However, more advanced 
camcorder operators control this function 
manually to achieve a more professional colour/
tint reproduction.

To change the setting
Set “W.BALANCE” in Function Menu. (

● The selected mode indicator except “AUTO” 

appears.

[AUTO]: White balance is adjusted 
automatically.

MWB 

: Adjust the white balance manually 

when shooting under various types of lighting. 
(

FINE 

: Outdoors on a sunny day.

CLOUD 

: Outdoors on a cloudy day.

[  ] = Factory-preset 

To return to automatic white balance
Set “W.BALANCE” to “AUTO”. (

GR-D338AH_EN.book  Page 29  Wednesday, January 25, 2006  5:45 PM