Справочник Пользователя для Nikon SB0C02(11) 6MB07511-02

323

U

If Sub-command dial is selected, aperture can only be 
adjusted with the sub-command dial (or with the main 
command dial if On is selected for Change main/sub). If 
Aperture ring is selected, aperture can only be adjusted with 
the lens aperture ring and the camera aperture display will 
show aperture in increments of 1 EV (aperture for type G lenses 
is still set using the sub-command dial). Live view is not 
available when Aperture ring is selected and a CPU lens with 
an aperture ring is attached. Note that regardless of the 
setting chosen, the aperture ring must be used to adjust 
aperture when a non-CPU lens is attached.

If Off is selected, the multi selector is used to choose the 
picture displayed during full-frame playback, highlight 
thumbnails, and navigate menus. If On is selected, the main 
command dial can be used to choose the picture displayed 
during full-frame playback, move the cursor left or right during 
thumbnail playback, and move the menu highlight bar up or 
down. The sub-command dial is used to display additional 
photo information in full-frame playback and to move the 
cursor up or down during thumbnail playback. While menus 
are displayed, rotating the sub-command dial right displays 
the sub-menu for the selected option, while rotating it left 
displays the previous menu. To make a selection, press 

2, the 

center of the multi selector, or 

J.

D

When using a CPU lens equipped with an aperture ring in live view, 
select Sub-command dial for Aperture setting.