Справочник Пользователя для Nikon SB0C02(11) 6MB07511-02

330

U

Reduce flicker and banding when shooting 
under fluorescent or mercury-vapor lighting 
during live view or movie recording. Choose 
a frequency which matches that of the local 
AC power supply.

Change time zones, set the camera clock, choose the date display 
order, and turn daylight saving time on or off.

B blinks in the top control panel when the clock is not set.

G button

➜ B setup menu

D

If you are unsure as to the frequency of the local power supply, test both 
options and choose the one that produces the best results. Flicker 
reduction may not produce the desired results if the subject is very 
bright, in which case you should try choosing a smaller aperture (larger 
f-number). The desired results may also not be achieved in high-
sensitivity movie mode or, due to the fact the selected shutter speed is 
not always used, during exposure preview (

0 57). To prevent flicker 

during exposure preview, select mode h and choose a shutter speed 
adapted to the frequency of the local power supply: 

1

/

125

 s, 

1

/

60

 s, or 

1

/

30

s 

for 60 Hz; 

1

/

100

 s, 

1

/

50

 s, or 

1

/

25

 s for 50 Hz.

G button

➜ B setup menu

Choose a time zone. The camera clock is automatically set 
to the time in the new time zone.

Set the camera clock (

0 34).

Choose the order in which the day, month, and year are 
displayed.

Turn daylight saving time on or off. The camera clock will 
automatically be advanced or set back one hour. The 
default setting is Off.