Листовка для Fujifilm FinePix S20 Pro
65
Advanced
Features
64
4
MODE
SELECT
F
ISO
AUTO
External flash settings (for flashes
with automatic flash control)
with automatic flash control)
For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
h Select External flash mode (TTL mode cannot be
flash and specify the settings as described below.
h Select External flash mode (TTL mode cannot be
used).
h Match the settings to the camera aperture setting.
Set the flash for the aperture setting measured by
the camera.
the camera.
h Match the sensitivity setting (
➡P.33) to the
setting on the camera.
Select “ON” in this setting when using an external
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.
●
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
speeds higher than 1/1000 sec.
●
!
Set the white balance (
➡P.59) to AUTO or Custom white
balance (
➡P.66).
±0
OFF
OFF
OFF
OFF
EXTERNAL FLASH
EXTERNAL FLASH
OFF
OFF
ON
ON
1
Sync terminal
Sync
terminal cap
terminal cap
Synchronization
cord
cord
1 Close the built-in flash.
2 Attach the synchronization cord from the external
2 Attach the synchronization cord from the external
flash to the Sync terminal on the camera by
pushing the cord into the terminal securely.
pushing the cord into the terminal securely.
●
!
Built-in and external flash units cannot be used at the same
time.
time.
2
0
1
0
2
3
The mode can be set to “
N
”, “
M
”, “
<
” (
➡P.41, 42,
43) or “
>
” (
➡P.44), but the use of “
<
” or “
>
” is
better.
●
!
Flash photography cannot be used when continuous shooting
(
(
➡P.50) or auto bracketing (➡P.51) is selected.
Using a Sync terminal
STILL PHOTOGRAPHY MENU
STILL PHOTOGRAPHY MENU
Select “ON” in this setting when using an external
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.
●
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
speeds higher than 1/1000 sec.
●
!
Set the white balance (
➡P.59) to AUTO or Custom white
balance (
➡P.66).
∞ USING AN EXTERNAL FLASH
±0
OFF
OFF
OFF
OFF
EXTERNAL FLASH
EXTERNAL FLASH
OFF
OFF
ON
ON
1
Hot shoe
1 Close the built-in flash.
2 Mount the external flash on the camera’s hot
2 Mount the external flash on the camera’s hot
shoe and tighten the locking screw.
●
!
Built-in and external flash units cannot be used at the same
time.
time.
2
0
1
0
2
3
The mode can be set to “
N
”, “
M
”, “
<
” (
➡P.41, 42,
43) or “
>
” (
➡P.44), but the use of “
<
” or “
>
” is
better.
●
!
Flash photography cannot be used when continuous shooting
(
(
➡P.50) or auto bracketing (➡P.51) is selected.
Use this setting to change just the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
h Compensation range: ±2 levels
–0.6 EV to +0.6 EV in approx. 0.3 EV increments
(total: 5 levels selectable)
See P.117 for information on EVs.
(total: 5 levels selectable)
See P.117 for information on EVs.
●
!
Depending on the type of subject and the shooting distance,
brightness adjustment may have no effect.
brightness adjustment may have no effect.
●
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
speeds higher than 1/1000 sec.
z FLASH BRIGHTNESS ADJUSTMENT
± 0
OFF
OFF
OFF
OFF
FLASH
FLASH
−0 3
−0 3
−0 6
−0 6
−0 6
±0
+0 3
+0 3
Ordinary external flash units can be used.
However, some camera-specific flash units cannot
be used.
However, some camera-specific flash units cannot
be used.
Using a Hot shoe