Справочник Пользователя для JVC GR-DX78
VIDEO PLAYBACK
EN
19
MasterPage: Video_Right
To choose whether or not the following displays
appear on the connected TV
appear on the connected TV
● Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (
Or, press DISPLAY on the remote control to turn on/off the
date indication.
date indication.
● Time Code
Set “TIME CODE” to “ON” or “OFF”. (
● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(
(
NOTES:
● It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (
● To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder’s Power Switch to “A” or “M”, then set your TV
to the appropriate input mode.
camcorder’s Power Switch to “A” or “M”, then set your TV
to the appropriate input mode.
● Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camcorder
is turned on.
is turned on.
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
Installing The Battery
The remote control uses one
lithium battery (CR2025).
lithium battery (CR2025).
1
Pull out the battery holder
by pushing the lock tab.
2
Insert the battery in the
holder, and be sure to have the
“+” mark visible.
“+” mark visible.
3
Slide the holder back in until
you hear a click.
Beam Effective Area (indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance for
indoor use is 5 m.
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance for
indoor use is 5 m.
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor is directly exposed to
sunlight or powerful lighting.
effective or may cause incorrect
operation when the remote sensor is directly exposed to
sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
camcorder’s Power Switch is set to “PLAY”.
B
PAUSE Button
● Pauses the tape (墌 pg. 20)
C
SLOW Rewind Button (
Left Button (
D
REW Button
● Rewind/Reverse Shuttle Search on a tape (墌 pg. 18)
● Displays previous file in a memory card (墌 pg. 22)
E
INSERT Button (
Up Button (
F
STOP Button
● Stops the tape (墌 pg. 17)
● Stops Auto Playback (墌 pg. 22)
G
R.A.EDIT Buttons (
H
FADE/WIPE Button (
I
PAUSE IN Connector (
J
DISPLAY Button (
K
SLOW Forward Button (
Right Button (
L
PLAY Button
● Starts Playback of a tape (墌 pg. 17)
● Starts Auto Playback of images in a memory card
M
FF Button
● Forward/Forward Shuttle Search on a tape (墌 pg. 18)
● Displays next file in a memory card (墌 pg. 22)
N
A. DUB Button (
Down Button (
O
MBR SET Button (
P
SHIFT Button (
Q
EFFECT Button (
R
EFFECT ON/OFF Button (
The following buttons are available when the camcorder’s
Power Switch is set to “A” or “M”.
Power Switch is set to “A” or “M”.
a
Zoom (T/W) Buttons
Zoom in/out (
Zoom in/out (
(Also available with the Power Switch set to “PLAY”)
b
START/STOP Button
Functions the same as the Recording Start/Stop
Button on the camcorder.
Functions the same as the Recording Start/Stop
Button on the camcorder.
c
S.SHOT Button
Functions the same as SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)
Functions the same as SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)
Playback Using The Remote Control
1
1
2
3
Lock tab
Remote sensor
GR-DX78PAL.book Page 19 Tuesday, January 6, 2004 3:27 PM