Справочник Пользователя для JVC GR-D270US

MasterPage: Start_Right

Adjust the white balance 
manually when shooting 
under various types of 
lighting.

Set the Power Switch 

to “M”.

Select “MWB” in 

“u W.BALANCE” menu. (

● The 

 indication blinks slowly.

Hold a sheet of plain white paper in front of 

the subject. Adjust zoom or position yourself so 
that the white paper fills the screen.

Press and hold MENU until 

 begins 

blinking rapidly.

● When the setting is completed, 

 resumes 

normal blinking.

Press MENU twice. The Menu Screen closes 

and the Manual White Balance indicator 

 is 

displayed.

● In step 3, it may be difficult to focus on the white 

paper. In such a case, adjust focus manually. 
(

● A subject can be shot under various types of 

lighting conditions indoors (natural, fluorescent, 
candlelight, etc.). Because the color temperature 
is different depending on the light source, the 
subject tint will differ depending on the white 
balance settings. Use this function for a more 
natural result.

● Once you adjust white balance manually, the 

setting is retained even if the power is turned off or 
the battery removed. 

These effects let you make pro-style scene 
transitions. Use them to spice up the transition 
from one scene to the next.

Wipe or Fader works when video recording is 
started or stopped.

Set the VIDEO/MEMORY Switch to “VIDEO”.

Set the Power Switch to “M”.

Set “v” to the desired mode. (

● The WIPE/FADER menu disappears and the 

effect is reserved.

● The selected effect indicator appears.

Press the Recording Start/Stop Button to 

activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect
Select “OFF” in step 

3. The effect indicator 

disappears.

● You can extend the length of a Wipe or Fader by 

pressing and holding the Recording Start/Stop 
Button.

● Some Wipe/Fader Effects cannot be used with 

certain modes of Program AE with special effects. 
(

墌 pg. 42) In this case, the selected indicator 

blinks or goes out.

OFF: Disables the function. (Factory-preset)

 FADER–WHITE: Fade in or out with a white 

screen.

 FADER–BLACK: Fade in or out with a black 

screen.

 FADER–B.W: Fade in to a color screen 

from a black and white screen, or fade out from 
color to black and white.

 WIPE–CORNER: Wipe in on a black screen 

from the upper right to the lower left corner, or 
wipe out from lower left to upper right, leaving a 
black screen.

 WIPE–WINDOW: The scene starts in the 

centre of a black screen and wipes in toward the 
corners, or comes in from the corners, gradually 
wiping out to the centre.

 WIPE–SLIDE: Wipe in from right to left, or 

wipe out from left to right.

 WIPE–DOOR: Wipe in as the two halves of 

a black screen open to the left and right, 
revealing the scene, or wipe out and the black 
screen reappears from left and right to cover the 
scene.

 WIPE–SCROLL: The scene wipes in from 

the bottom to the top of a black screen, or wipes 
out from top to bottom, leaving a black screen.

 WIPE–SHUTTER: Wipe in from the centre 

of a black screen toward the top and bottom, or 
wipe out from the top and bottom toward the 
centre leaving a black screen. 

GR-D290_270US.book  Page 41  Tuesday, November 30, 2004  9:53 AM