Справочник Пользователя для Ricoh 500SE
116
Ch
an
g
an
g
in
g
Camera S
e
ttin
g
g
s
6
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 1 second,
but this can be changed.
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 1 second,
but this can be changed.
To change the image confirmation time, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.107.
2
Press the " button to select [LCD CONFIRM.] and
press the $ button.
press the $ button.
3
Press the !" buttons to select
the desired setting.
the desired setting.
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
# button and press the MENU/
OK button.
Caution------------------------------------------------------------------------------------------
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may
remain on the monitor while the image is displayed.
remain on the monitor while the image is displayed.
Changing Image Confirmation Time
(LCD CONFIRM.)
Available Settings
OFF (Image not displayed for confirmation)
0.5SEC.
1 SEC. *Default setting
2 SEC.
3 SEC.
OFF (Image not displayed for confirmation)
0.5SEC.
1 SEC. *Default setting
2 SEC.
3 SEC.