Справочник Пользователя для Ricoh 500SE

1

2

Turn the mode dial to 5/K and shoot the picture.

3

Press the Q (Quick Review) button.

• A screen appears confirming whether to send the image.

4

• When the Bluetooth

®

 function is used 

for the first time, a screen appears 
confirming whether to search for a 
destination device.

• If you have already searched for a 

destination device, a list of destination 
devices appears. Go to Step 6.

• If the camera is connected using a 

serial connection, a screen appears confirming whether to disconnect 
the serial connection. Select [YES] and press the MENU/OK button 
and go to Step 6.

• If the camera is connected using a wireless LAN connection, a screen 

appears confirming whether to disconnect the wireless LAN 
connection. Select [YES] and press the MENU/OK button, and go to 
Step 5 or Step 6. (Only for Caplio 500SE-W)

5

Press the $ button to select 
[YES] and then press the 
MENU/OK button.

• The camera begins searching for a 

destination device and a list of 
destination devices appears when the 
search is completed.

• By default, up to five devices can be 

discovered, but you can change this to 
search for any number of devices between one and ten. (GP.176)

6

Press the !" buttons to select 
the desired destination device.

• If the desired destination device is not 

listed, press the ADJ. button to search 
again for destination devices.

• Select a destination device and press 

the $ button to display information 
about the destination device.

• To delete a destination device from the 

list, select the device and press the D (Delete) button.

When [QUICK SEND MODE] is set to [2TOUCH]