Справочник Пользователя для Ricoh 500SE
202
10
U
s
in
g
th
e W
e W
irel
ess
ess
L
AN F
u
n
c
tio
n
(O
n
n
ly
fo
r Cap
lio
500S
E-W
)
After completing the advanced settings on the [Detailed Setups for
selections] screen, create a communication list combining the
desired settings and transfer it to the camera via the supplied USB
cable.
selections] screen, create a communication list combining the
desired settings and transfer it to the camera via the supplied USB
cable.
Caution------------------------------------------------------------------------------------------
[USB CONNECTION] must be set to [ORIGINAL] on the camera's SETUP menu.
(GP.123)
(GP.123)
Note ----------------------------------------------------------------------------------------------
You can also save the communication list on the computer, copy it to an SD memory
card, and import it into the camera. (GP.205)
card, and import it into the camera. (GP.205)
1
If Caplio Setting is not active, on the [Start] menu, point
to [All Programs] or [Programs], point to [Caplio
Software], and then click [Caplio Setting].
to [All Programs] or [Programs], point to [Caplio
Software], and then click [Caplio Setting].
• Caplio Setting is activated and the [Caplio Setting] screen appears.
2
Click the [Add] button
under the [Setup Name]
list.
under the [Setup Name]
list.
• The [New Name for the Setup]
dialog box appears.
3
Enter a setting name, and
then click [OK].
then click [OK].
4
Select [Wireless LAN] in
the [Connection Method]
field, and then select the
desired wireless LAN setting from the pull-down menu.
the [Connection Method]
field, and then select the
desired wireless LAN setting from the pull-down menu.
• The settings registered on the Detailed Setups [Wireless LAN] tab are
displayed.
5
Select the desired network setting from the [Network
Setup] pull-down menu.
Setup] pull-down menu.
• The settings registered on the Detailed Setups [Network] tab are
displayed.
Creating a Communication List and
Transferring it to the Camera