Справочник Пользователя для Ricoh 175743

102

Note

• This function cannot be used when [PIC QUALITY/SIZE] is set to RAW.
• When shooting with S Multi- or M Multi-Shot, the ISO sensitivity is fixed to AUTO even if it is

set to 64,100.

• The maximum number of images that can be shot in the Multi-Shot mode depends on the

image size setting.

• The numbers of images that can be shot in the Multi-Shot mode with the built-in memory

are as shown in the table below.

• When an SD memory card is used to record the images shot in the Multi-Shot mode,

images can be recorded normally until the SD memory card becomes full. Once the
maximum number of images that can be shot is exceeded, the image recording speed
becomes slow. (This depends on the image size setting.)

• When shooting with S Multi-Shot or M Multi-Shot, PIC QUALITY/SIZE can be set to either

F3264 or N3264.

Make sure the camera power is on and turn the mode dial to
5, P, A or M.

Press the M/O button.

The Shooting Setting menu appears.

Press the " button to select [CONT] and press the $ button.

Press the !" buttons to select
[CONT], [SCONT], or [MCONT].

Press the M/O or # button.

If you pressed the # button in
step 5, press also the M/O
button.

The Shooting Setting menu closes and
the symbol is displayed at the top of the
screen.

F3264 (8M) F3:2 (8M)

N3264 (8M) N2592 (5M) N2048 (3M) N1280 (1M) N640 (VGA)