Справочник Пользователя для Ricoh 175743
90
Setting the White Balance (Detail)
1.
Make sure the camera power is on and turn the mode dial to
5, P, A or M.
5, P, A or M.
2.
Press the ADJ. dial.
The camera enters the ADJ. mode.
3.
Turn the ADJ. dial.
4.
Press the #$ buttons until the White Balance menu
appears.
appears.
5.
Press the !" button to select
[Detail] and press the DISP. button.
[Detail] and press the DISP. button.
The Detail Setting menu appears.
6.
Press the !" buttons to select an
White Balance.
White Balance.
7.
Press the M/O button.
8.
Press the M/O button.
The setting of white balance is completed
and the LCD monitor displays a marking.
This setting will be used for shooting until
you change it.
and the LCD monitor displays a marking.
This setting will be used for shooting until
you change it.
Note
In Auto Mode, white balance may not be adjusted correctly for a subject that is mostly dark. In
this case, add something white as the subject.
this case, add something white as the subject.
Caution
When shooting with flash, white balance may not be adjusted correctly. In this case, switch to
Auto Mode for shooting with flash.
Auto Mode for shooting with flash.