Справочник Пользователя для Sony DSC-P32

Скачать
Страница из 120
92
Shooting still images / movies
The power turns off 
suddenly. 
• If you do not operate the camera for about 90 
seconds while the power is on, the camera turns 
off automatically to prevent wearing down the 
battery (when [Power Save] is [Off], after three 
minutes.) (page 17).
• The batteries are discharged. 
p Turn on the camera again (page 20).
p Install charged batteries (page 14).
Symptom
Cause
Solution
The LCD screen is not 
turned on even when the 
power is turned on.
• The power was turned off with the LCD screen 
turned off the last time you used the camera.
p Turn on the LCD screen (page 34).
The subject is not visible 
on the LCD screen.
• The mode selector is not set to 
 or 
.
p Set the mode selector to 
 or 
 (pages 26, 72).
The image is out of focus.
• The subject is too close. 
While shooting still images, 
 (Camera) is 
set to 
 or 
.
• You set the focus preset distance.
p Set the macro recording mode (DSC-P72 only). Make sure to 
place the lens farther away from the subject than the shortest 
shooting distance when shooting (page 30)
p Cancel the mode (page 58)
p Set to the auto focus mode (page 50).
Unable to zoom (DSC-P72 
only).
• You cannot zoom while shooting a movie 
(MPEG movie).
Smart zoom does not 
function.
• You cannot use smart zoom while shooting a 
movie (MPEG movie).
• The LCD screen is turned off.
• The 
image size
 is set to [3.1M] or [2.8M (3:2)].
• [Smart Zoom] is set to [Off] in the SET UP 
settings (DSC-P72 only).
p Turn on the LCD screen (page 34).
p Set 
image size
 to other settings except [3.1M] and [2.8M (3:2)] 
p Set [Smart Zoom] to [On] (page 106).
The image is too dark.
• You are shooting a subject with a light source 
behind the subject.
• The brightness of the LCD screen is too low.
p Adjust the exposure (page 50).
p Adjust the brightness of the LCD screen (page 107).
Symptom
Cause
Solution