Справочник Пользователя для Sinar Hy6

A

SSEMBLY 

I

NSTRUCTIONS 

 

 

 

21

5.3.2  Assembly and Attachment of the Sinarback and the Adapter Plate  
 
To attach a Sinarback to the camera body, an adapter kit with the necessary accessories 
and tools has to be used. The adapter kit is included in the delivery of the following Sinar 
Hy6 systems:  
 

•  Sinar Hy6-e75  
•  Sinar Hy6-e54  

•  Sinar Hy6-m54  

 
If a Sinar Hy6 711.14.041 (only camera body), an adapter kit is not included in the delivery 
and has to be purchased separately. The Sinarbacks e75 LV / e54 LV and the Sinarback 54 
MC require different adapter kits. Please contact your dealer for further information  

 

 
 
5.3.2.1  

Assembly and Attachment of a Sinarback eMotion  

 
The following description applies to the Sinar Hy6 systems Hy6-e75 and Hy6-e54, and to 
the assembly of the Sinarbacks e75 LV and e54 LV to a Sinar Hy6. 

 

First, remove the protective cover that is fixed with two screws from the back. 
Follow the assembly instructions described below.  
 
 

 

1 

Sinarback e75 LV or e54 LV 

 
The following parts are included in the 
adapter kits for the Sinarbacks e75 LV and 
e54 LV: 
 
2 

Adapter plate 

3 

Spacer 

4 

Screws 

5 

Screwdriver 

Fig. 5 / 12 Sinarback eMotion and adapter kit  

 

 

When attaching a back or a film magazine, make sure that all four of the pins are 
locked simultaneously. When not all four of the pins are locked, the back or film 
magazine has to be removed from the camera body and re-attached, otherwise 
the back or magazine can fall off. Please make sure that the back is attached 
safely to the camera body to prevent any damage by falling off of the magazine.   

1

 

2

 

3

 

4

 

5