Справочник Пользователя для VistaQuest VQ1100

 

- 4 - 

 

 

Step 1: Slide open the battery door by lifting the tab on the door. 

Step 2: Insert three AAA batteries with the polarity as shown: 

Step 3: Slide close the battery cover. 

 

Warning: Do not open the battery door when the camera is powered ON.  
This will cause all images in memory to be lost immediately. Please download 
The pictures to your computer if you want to turn on the battery cover.   

1.  Always download your images to your computer soon after you have 

captured them. Never assume your images will be retained for more 
than three or four days. If the batteries are depleted, your images will 
be lost. 

2.  If you must change the batteries, makes sure the camera is OFF and 

then change the batteries in less than thirty (30) seconds. 

3. 

If you will not use the camera for a long time (several days, or more) 
remove the batteries. The batteries will discharge slowly if left in the 
camera. This may cause complete battery discharge as well as loss 
of images. The batteries may corrode if left in the camera for 
extended periods of time. 

 

4.  Dispose of batteries properly in accordance with local laws and 

regulations. Do not place them in fire. 

5.  The digital camera has an automatic power-saving feature. The 

camera will turn off automatically if it has not been used after 
approximately thirty (30) seconds. 

When the camera is connected to a computer using a USB cable, it is not 
necessary to use batteries because the camera uses the power provided by 
the computer through the USB interface