Справочник Пользователя для Toshiba IK-WB01A

Скачать
Страница из 64
33
Introduction
Installation/Setup
Others
Operation
NOTE
This setting determines the speed of the network camera communicating
with other devices on the wireless LAN. The IEEE 802.11b standard
supports the communication speeds of 1.0, 2.0, 5.5, and 11 Mbps. However,
it is recommended to select "auto."
Configure the WEP key
① Click ▼ for the "WEP Key" setting in the right side of the window.
② Select an item from the pull-down menu.
・This  setting  determines  the  method  used  to  encrypt  data
transferred during wireless communication. Typically, 64-bit and
128-bit WEP keys are used. (128-bit WEP sets tighter security)
・You can select either of the two WEP keys or select not to use an
encryption key. If you are connecting the network camera to an
existing wireless LAN that uses a WEP key, set the same WEP
key to the network camera.
NOTE
WEP setting is not mandatory. Do not perform the WEP setting if you are
not using WEP with your current wireless LAN.
When you use "Encryption" with the "WEP Key" for the network camera,
select the items for encryption and WEP key correctly. There are rules for
entering the WEP keys used for wireless data encryption. Enter a 10-byte
(hexadecimal digits) or 5-byte (ASCII text) character string for the 64-bit
WEP key, and a 26-byte (hexadecimal digits) or 13-byte (ASCII text)
character string for the 128-bit WEP key. Configure the WEP key by referring
tables below.
Sometimes "64-bit WEP" is described as "40-bit WEP", in here, we use the
term "64-bit WEP." This means that other wireless devices using 40-bit
WEP are using the same level of security as and are compatible with devices
that use 64-bit WEP.
When you do not perform encryption of the data by WEP, your wireless
communication could be intercepted easily by third party. By using WEP for
your data encryption, it becomes very difficult to decode the data. Because
of this, it is recommended to do WEP setting if you are using wireless
communication.
64bit WEP Key
WEP Key Setting
128bit WEP Key
ASCII text
16 hexadecimal
Number of Characters: 5 characters
Characters You Can Use: 
Alphanumeric characters (0 to 9, 
a to z, A to Z)
Number of Characters: 13 characters
Characters You Can Use: 
Alphanumeric characters (0 to 9, 
a to z, A to Z)
Number of Characters: 10 characters
Characters You Can Use: 
Alphanumeric characters (0 to 9, 
a to f, A to F)
Number of Characters: 26 characters
Characters You Can Use: 
Alphanumeric characters (0 to 9, 
a to f, A to F)
64bit WEP Key
WEP Key Setting (Example)
※There is no distinction between capital letters and small letters.
128bit WEP Key
ASCII text
16 hexadecimal
nwcam
toshibaikwb01
abcd1048ef
1234567890abcdef0987
654321