Справочник Пользователя для Veo 802.11b

Page 18 of 69 

The following features are available on the Live Video page: 
 

Clicking any of the yellow directional buttons will cause the camera to move one small 
step in that direction. Click and hold the left mouse key down to make the camera 
move one large step. When the camera reaches its end of travel, the buttons for that 
direction are grayed out and disabled. 

You can select one of the three available image sizes.  Note: Changing the window 
size only changes the size of the image on your display and does not affect the image 
being sent by the camera. Only an administrator can change the size of the image 
streamed from the camera. Refer to  Section 3.3 Camera Configuration for more 
information. 

Use the Digital Zoom to zoom the picture 2X.  

Adjusts the brightness level of the image. 
 

Enables or disables audio monitoring. 

Clicking on Snapshot will open a menu with three functions,  Snapshot,  Save, and 
Cancel. Click  Snapshot to capture the current image. Click Save to save the image 
to your hard drive. Click Cancel to discard the image. 

Clicking on  Record Video will open a menu with four functions, Start, Preview, Save , 
and Cancel. Click  Start to start capturing video. Click  Stop to stop capturing. Click 
Preview to open Windows Media Player and playback the video. Click Save to save 
the video to your hard drive. Click Cancel to discard the video. 

Takes you back to the main viewing page. 

Setup (admin only) 

Opens  the camera setup pages where you can access all of the camera’s 
configuration settings. 

Reset (admin only) 

Resets the camera. Resetting has the same effect as turning the power off and then 
on. Note: You must log in again after a reset. 

Takes you to the Technical Support section of the Veo Observer website. 

Provides the version information.