Справочник Пользователя для Veo 802.11b
Page 52 of 69
54g Wireless DSL/Cable Gateway Router - [F5D7230-4]
1) Log into your router.
2) On the main page, select Firewall on the left side of the page.
3) Under Firewall, select Virtual Servers.
4) Enter the following information on the page:
Line #1:
1) Log into your router.
2) On the main page, select Firewall on the left side of the page.
3) Under Firewall, select Virtual Servers.
4) Enter the following information on the page:
Line #1:
Enable:
Checked in
Description:
VeoWeb
Internet Port:
80 to 80
Type:
TCP
Private IP address:
Type in the camera's IP address. (Look on the Observer’s IP Address
LCD display for the last 3 digits of the camera’s IP address.)
LCD display for the last 3 digits of the camera’s IP address.)
Private Port:
80 to 80
Line #2:
Enable:
Checked in
Description:
VeoCam
Internet Port:
1600 to 1600
Type:
TCP
Private IP address:
Type in the camera's IP address. (Look on the Observer’s IP Address
LCD display for the last 3 digits of the camera’s IP address.)
LCD display for the last 3 digits of the camera’s IP address.)
Private Port:
1600 to 1600
5) Click Apply changes to save the settings. The Observer should now be configured to work with your router
and be accessible from the Internet.
and be accessible from the Internet.
D-Link (http://www.dlink.com)
DI-604/DI-614+/DI-624
1) Log into your router.
2) On the main page, click on Advanced at the top of the page.
3) On the left side of the page, click on Virtual Server. Note: Make sure DMZ host is disabled. If DMZ is
enabled, it will disable all Virtual Server entries.
4) Enter the following information on the page:
Enabled/Disabled:
Enabled
Name:
VeoWeb
Private IP:
Type in the camera's IP address, for example: 192.168.0.3
Protocol Type:
TCP
Private Port:
80
Public Port:
80
Schedule:
Always
5) Click Apply to save the settings.
6) Enter the following information on the page:
6) Enter the following information on the page:
Enabled/Disabled:
Enabled
Name:
VeoCam
Private IP:
Type in the camera's IP address, for example: 192.168.0.3
Protocol Type:
TCP
Private Port:
1600
Public Port:
1600
Schedule:
Always
7) Click Apply to save the settings. The Observer should now be configured to work with your router and be
accessible from the Internet.
DI-704/704P
1) Log into your router.
2) On the main page, click on Advanced at the bottom of the page.
3) On the Virtual Server page, enter the following information:
accessible from the Internet.
DI-704/704P
1) Log into your router.
2) On the main page, click on Advanced at the bottom of the page.
3) On the Virtual Server page, enter the following information: