Справочник Пользователя для Pelco EHXM31C22-2X
16
C1301M (6/05)
IR CUT FILTER (23X DAY/NIGHT CAMERA)
ExSite EHXM has two modes of operation: color, and black-white. You can increase sensitivity in
low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is
preferred in normal lighting conditions.
low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is
preferred in normal lighting conditions.
The following are the settings for the IR cut filter:
OFF
Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT).
AUTO (default) Automatic operation is controlled by the Auto IR Level setting.
Auto IR Level
The auto IR level is the light level at which the infrared filter switches IN or OUT.
Following are the available settings for the Auto IR Level:
DUSK (default) Approximately 6 lux (black-white)
Approximately 13 lux (color)
DARK
Approximately 0.1 lux (black-white)
Approximately 2 lux (color)
Approximately 2 lux (color)
NOTES:
• If backlight compensation is ON and the IR cut filter switches OUT in normal lighting
section.
•
Low light
does not mean
no light
. Some type of illumination is required (street light,
IR light, etc.). The camera is not sensitive to IR light when the IR cut filter is IN.
EXIT
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE EHXM
<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
TYPE OF LIGHTING
OUTDOOR
AUTO FOCUS
ON
ZOOM LIMIT
X184
ZOOM SPEED
MEDIUM
LOW LIGHT LIMIT
2
IR CUT FILTER*
AUTO
AUTO IR LEVEL*
DUSK
<ADVANCED SETTINGS>
BACK
CAMERA
* Available only with the 23X day/night camera.