Справочник Пользователя для Pelco EHXM31C22-2X

 

C1301M (6/05)

33

 

(See Page 9)

 

An auxiliary output is a programmable signal from the system that can trigger another device to 
operate. An auxiliary output is programmable to trigger from an alarm or from a controller.

An AUX 1 command from the controller will activate the relay in the system and operate the device 
that is connected to the relay. The output of AUX 1 and AUX 2 can be connected to the alarm input 
of a system switch to activate automatic monitor switching and recording.

The following are the available AUX MODE settings:

TOGGLE (default)

Changes the state of the auxiliary output every time an AUX command is 
received from the controller.

LATCHING 

Must receive an AUX ON/AUX OFF command from the controller to turn 
the auxiliary output on/off.

MOMENTARY 

An AUX ON command from the controller turns the auxiliary output on 
for the programmed DWELL TIME. The auxiliary output will 
automatically turn off when the dwell time is finished.

EXIT

LANGUAGE  

ENGLISH

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>

RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

PELCO EXSITE EHXM

<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>

BACK
EXIT

UNIT SETTINGS

AUX 1 MODE  

TOGGLE

  DWELL TIME (SECS)  

1

AUX 2 MODE  

TOGGLE

  DWELL TIME (SECS)  

1

BACK
EXIT

AUX