Руководство Пользователя для Pelco C2950M-E
C2950M-E (8/10)
65
ANALYTIC CONFIGURATION
Figure 37. Analytic Configuration Page
To configure the Camera Sabotage behavior using a standard Web browser, you must create a profile, activate the behavior, and select the
behavior-specific settings for the profile.
behavior-specific settings for the profile.
Camera Sabotage uses the following behavior-specific settings:
Delay before alarm: Defines the delay between the time a violation is detected and the actual trigger of an alarm. If the violation stops within
the delay period, no alarm is triggered. If the violation lasts longer than the delay period, an alarm is triggered. The default setting is 10 seconds.
the delay period, no alarm is triggered. If the violation lasts longer than the delay period, an alarm is triggered. The default setting is 10 seconds.
Alarm severity: Defines the severity level of an alarm. Available settings include Minor, Normal, Major and Critical. The default setting
is Minor.
is Minor.
NOTE: Analytic alerts can be seen in the event stream, but alarms are only transmitted through the analytics API.