Справочник Пользователя для Panasonic DMC-GF1K
VQT2G62
84
Advanced (Recording pictures)
Press 2/1 to select [MULTI FILM].
Select either [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3] with 3/4, and then select the film
to be set for each with 2/1.
•
You can also use the rear dial to set.
•
[OFF] can be selected only for [MULTI FILM 3].
Press [MENU/SET] to set.
•
You can also press the shutter button halfway to set.
Focus on the subject and take a picture.
•
It will continuously take pictures by keeping the shutter button pressed when it is set to
burst mode. (Up to 3 pictures)
•
When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [
pressed. (It will operate same as [
] even if it is set to [
].)
•
Multi film indication ([
]) displayed on the LCD monitor/optional external viewfinder will
flash until all pictures of preset amount are taken.
Note
•
[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
•
White Balance Bracket will be disabled when the Multi Film Bracket is set.
•
Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
[REC] mode:
±´
Taking pictures by specifying the aperture/
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [
].
Rotate the rear dial to set the aperture
value.
•
It will switch between aperture setting operation and
Exposure Compensation operation every time the
rear dial is pressed.
•
Rotate the rear dial to display the [EXPO.METER].
(P127)
Take a picture.
[
] Aperture-priority AE
DMC-GF1GN-VQT2G62_eng.book 84 ページ ２００９年８月２０日 木曜日 午前１１時７分