Справочник Пользователя для Panasonic DMC-LC1PP
Recording pictures (advanced)
64
Setting the White Balance manually (White set)
Preparation
• Set the operational mode dial except for [
• Set the operational mode dial except for [
]. (P30)
1
Select [W.BALANCE] and set to
[
[
].
2
(Only when setting the white
balance again) Press
balance again) Press
1.
3
Aim the camera at a sheet of white
paper
paper
1 or a similar white object
so that it completely fills the frame
to white on the screen and press
the shutter button fully.
to white on the screen and press
the shutter button fully.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
setting.
¬Suggestions/Tips ¬
• When setting the white balance to the
mode except for [AUTO] or
[
[
] (monochrome), you can finely
adjust the white balance. (P65)
• The setting of the white balance is
applied to the other recording modes.
• In Motion image mode, the white
balance is fixed to [AUTO].
• When the white balance is set to
[AUTO], the adequate white balance is
automatically set by taking a picture
with the flash, but the white balance
may not be properly adjusted when
the photo flash does not sufficiently
reach to the subject.
automatically set by taking a picture
with the flash, but the white balance
may not be properly adjusted when
the photo flash does not sufficiently
reach to the subject.
2560
REC
1
/
4
SETUP
W.BALANCE
WB ADJUST.
PICT.SIZE
QUALITY
PICT.SIZE
QUALITY
WB
B/W
SELECT
SET
EXIT
MENU
MENU
REVIEW
REVIEW
B/W
LC1PP.book 64 ページ 2004年1月26日 月曜日 午後6時50分