Справочник Пользователя для Panasonic DMCLZ5K
Advanced
41
VQT0U87
• The available flash range is an
approximation.
• Refer to P63 for the ISO sensitivity.
• Refer to P25 for the focus range.
• If ISO sensitivity is set to [AUTO] when
• Refer to P25 for the focus range.
• If ISO sensitivity is set to [AUTO] when
using the flash, it will be automatically
increased to a maximum of [ISO400].
increased to a maximum of [ISO400].
• To avoid noise, we recommend
decreasing the ISO sensitivity (P63) or
setting [PICT.ADJ.] to [NATURAL]. (P68)
setting [PICT.ADJ.] to [NATURAL]. (P68)
∫ Shutter speed for each flash setting
¢3 The shutter speed changes depending
on the slow shutter setting. (P67)
• There may be differences in the above
shutter speeds in scene mode.
– [NIGHT SCENERY] (P51):
– [NIGHT SCENERY] (P51):
8 to 1/2000th
– [FIREWORKS] (P53):
1/4th, 1 second
– [STARRY SKY] (P53):
15 seconds, 30 seconds, 60 seconds
• Do not look directly at the flash at
close range when it is activated.
• If you bring the flash too close to an
object, the object may be distorted or
discolored by the heat or lighting from
the flash.
discolored by the heat or lighting from
the flash.
• Do not cover the photo flash with your
fingers or other objects.
• While the flash is charged, the screen
turns off and you cannot take pictures.
The status indicator lights. [Except
when using the AC adaptor (DMW-AC6;
optional).]
If the remaining battery power is low,
the screen may be turned off for a
longer period of time.
when using the AC adaptor (DMW-AC6;
optional).]
If the remaining battery power is low,
the screen may be turned off for a
longer period of time.
• If you press the shutter button halfway
when the flash is activated, the flash icon
turns red.
turns red.
• When the jitter alert appears, we
recommend using a tripod.
• When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
not be adjusted properly and the picture
may become bright or dark.
• When taking a picture with the flash, the
white balance is automatically adjusted
[except for [
[except for [
] (Daylight)]. However, the
white balance may not be properly
adjusted if the flash level is insufficient.
(P62)
adjusted if the flash level is insufficient.
(P62)
• When the shutter speed is fast, the flash
effect may not be sufficient.
• If you repeat taking a picture, it may not
actually be taken even if the flash is
activated. Take a picture after the access
indication disappears.
activated. Take a picture after the access
indication disappears.
• The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
• When you set burst mode or auto bracket,
only 1 picture is recorded for every flash
activated.
activated.
Flash setting
Shutter speed
(Sec.)
: AUTO
1/30 to 1/2000
: AUTO/
Red-eye reduction
1/30 to 1/2000
: Forced ON
: Forced ON/
: Forced ON/
Red-eye reduction
1/30 to 1/2000
: Slow sync./
Red-eye reduction
1/8
¢3
to 1/2000
: Forced OFF
1/8
¢3
to 1/2000
VQT0U87ENG.book 41 ページ ２００５年１２月２７日 火曜日 午後７時１２分