Справочник Пользователя для Nikon D7100 Body

152

t

An optional GP-1 GPS unit can be connected to the camera’s accessory terminal 
(0 310) using the cable supplied with the GPS unit, allowing information on the 
camera’s current position to be recorded when photographs are taken. Turn the 
camera off before connecting the GPS unit; for more information, see the manual 
provided with the GPS Unit.

❚❚Setup Menu Options

The GPS item in the setup menu contains the options listed below.
• Standby timer: Choose whether the exposure meters turn off automatically when a 

GPS unit is attached. 

• Position: This item is only available if a GPS unit is connected, when it displays the 

current latitude, longitude, altitude, and Coordinated Universal Time (UTC) as 
reported by GPS.

• Use GPS to set camera clock: Select Yes to synchronize the camera clock with the time 

reported by the GPS device.

Exposure meters turn off automatically if no operations are performed for the 
time selected for Custom Setting c2 (Standby timer, 0 237; to allow the camera 
time to acquire GPS data, the delay is extended by up to one minute after the 
exposure meters are activated or the camera is turned on). This reduces the drain 
on the battery.

Disable Exposure meters do not turn off while a GPS unit is connected.

A

UTC data is provided by the GPS device and is independent of the camera clock.

A

The n Icon

Connection status is shown by the n icon:
•

n (static): Camera has established communication with the GPS 
unit. Photo information for pictures taken while this icon is 
displayed include an additional page of GPS data (0 191).

n (flashing): The GPS unit is searching for a signal. Pictures taken 
while the icon is flashing do not include GPS data.

• No icon: No new GPS data have been received from the GPS unit for 

at least two seconds. Pictures taken when the n icon is not displayed do not include GPS 
data.