Справочник Пользователя для Nikon COOLPIXS60BK

Inserting the Battery

First Ste

p

s

Turn the camera off and make sure that the power-on 
lamp and the monitor have gone out before opening 
the battery-chamber/memory card slot cover.

To eject the battery, open the battery-chamber/ 
memory card slot cover and slide the battery latch in 
the direction shown 

1

. The battery can then be 

removed by hand 

2

.

• Note that the battery may become hot during use; 

observe due caution when removing the battery.

To turn on the camera, press the power switch. The 
power-on lamp (green) will light for a moment and the 
monitor will turn on.

To turn off the camera, press the power switch again.

When the camera turns off, both the power-on lamp 
and monitor will turn off.

D

If no operations are performed for about a minute (default setting), the monitor will turn off 
automatically and the camera will enter standby mode. If no operations are performed for another 
three minutes, the camera will turn off automatically (the auto off function).

Pressing the power switch, or the shutter-release button, while the monitor is off in standby mode 
will reactivate the monitor.

The time allowed to elapse from before the camera enters standby mode can be changed from the 
Auto off option (

A 144) in the setup menu (A 133).