Справочник Пользователя для Kodak DX3215
40
Chapter 7
Installing the Dock Insert
KODAK DX-series cameras are packaged with a Dock insert, which is used to
custom-fit the camera to the EASYSHARE Camera Dock.
custom-fit the camera to the EASYSHARE Camera Dock.
1
Place the front tabs on the insert into the
slots in the EASYSHARE Camera Dock cavity.
slots in the EASYSHARE Camera Dock cavity.
2
Fit the insert down into the cavity and snap
the insert into place.
the insert into place.
Connecting the EASYSHARE Camera
Dock
Ensure that you have installed the software from the KODAK Picture
Software CD (see
Software CD (see
). Then, remove the camera from the EASYSHARE
Camera Dock.
1
Plug the labeled end of the USB cable
(included with camera) into the labeled
USB port on the computer.
(included with camera) into the labeled
USB port on the computer.
2
Plug the other end of the USB cable into the
labeled USB connector on the back of the
Dock.
labeled USB connector on the back of the
Dock.
3
Plug the AC adapter (included with the
Dock) into the back of the Dock and into a
power outlet.
Dock) into the back of the Dock and into a
power outlet.
Your AC adapter may be different from the one pictured, or may have
additional plugs. Use the plug that accommodates your type of power outlet.
Keep the EASYSHARE Camera Dock connected for transferring pictures. Keep
the AC adapter connected for charging the Battery Pack and providing power to
the camera.
additional plugs. Use the plug that accommodates your type of power outlet.
Keep the EASYSHARE Camera Dock connected for transferring pictures. Keep
the AC adapter connected for charging the Battery Pack and providing power to
the camera.
1
2
3