Листовка для Kodak CIS-217
CIS-217
July 2001
July 2001
Wind Off
Check the frame-counter window to make
sure the “E” is aligned with the arrow.
If not, grip camera and cover lens, press
shutter button, and turn thumbwheel until film
is fully rewound.
Insert special tool into end slot as shown.
Break Off Film Door
Use tool to break off the film door and
remove film.
Remove Film
© Eastman Kodak Company, 2001
Insert Tool
CAUTION: This camera body
contains a high-voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film from its respective com-
partment. If sections of the camera
are separated, do not touch the
circuit board.
contains a high-voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film from its respective com-
partment. If sections of the camera
are separated, do not touch the
circuit board.
Exposed
Film
Film
Opened camera
with film removed.
with film removed.
shutter button
thumbwheel
5
• Place used camera in recycle bin
for Kodak to recyle.
• Visit our Web site at
http:// www.kodak.com/go/kes
for details about Kodak’s
recycling program.
for Kodak to recyle.
• Visit our Web site at
http:// www.kodak.com/go/kes
for details about Kodak’s
recycling program.
CAUTION: To avoid injury, use tool carefully.
CURRENT INFORMATION SUMMARY
Opening Instructions for the
SNAP KIDS Beauty Film with Lens
Wear eye protection when opening all cameras.