Справочник Пользователя для Canon ZR950 A

77

 When set to [

 ON], the camcorder’s on-screen displays will appear also 

on the screen of a connected TV or monitor.
When the date and time are displayed on the camcorder’s screen they will also appear on 
a connected TV regardless of the [TV SCREEN] setting. Turn off the date/time display with 
the [DATA CODE] setting (

 You can display a grid or a horizontal line at the center of the screen. Use the 

markers as a reference to make sure your subject is framed correctly (vertically and/or 
horizontally).
• Using the markers will not affect the recordings on the tape.

 You can hide the on-screen displays to show only the playback picture on the 

full screen.
• Tape operation displays appear for 2 seconds.
• Warning messages, the data code (if activated), and displays on the index screen will 

appear regardless of the setting.

• All on-screen displays will appear while the playback image is magnified or a digital 

effect is activated.

 When you start playing back a tape or when the date of the recording 

changes, the date and time will be displayed for 6 seconds.

The demonstration mode displays the camcorder’s main features. It starts 

automatically when the camcorder is powered with the power adapter if you leave it turned 
on without loading a recording media for more than 5 minutes.
• To cancel the demo mode once it started, press any button, turn off the camcorder or 

insert a videocassette.

System Setup (Beep, Power Save, etc.)

 SYSTEM SETUP

Allows the camcorder to be operated with the wireless controller.

A beep will accompany some operations like turning on the camcorder, the self-

timer countdown, etc. It also serves as a warning beep under unusual conditions.

[WL.REMOTE]

ON], [

OFF 

]

z

z

z

z

–

[BEEP]

HIGH VOLUME], 

[

LOW VOLUME], [

OFF]

z

z

z

z

–

[POWER SAVE]

ON], [

OFF]

z

z

–

–

–

[FILE NOS.]

[

RESET], [

–

z

–

–

–

[FIRMWARE]

–

–

–

–

z

–

CO

PY