Справочник Пользователя для Canon ZR950 A

Additional Information

Editing

Cannot record with this camcorder video input from an external video device connected using a DV cable.

- Wrong signal standard. Refer also to the instruction manual of the connected device.

List of Messages

(in alphabetical order)

CANNOT TRANSFER!

- You attempted to transfer a still image that cannot be displayed with this camcorder.

CARD ERROR

- A memory card error occurred. The camcorder cannot record or display the image.

The error may be temporary. If the message disappears after 4 seconds and

flashes red, turn the

camcorder off, remove the card and reinsert the card. If

changes to green, you can continue recording/

playback.

CARD FULL

- Memory card is full. Erase some images (

54) to free some space or replace the memory card.

CHANGE THE BATTERY PACK

- Battery pack is exhausted. Replace or charge the battery pack (

CHECK THE CASSETTE [AUDIO MODE]

- You attempted to dub audio (

66) on a tape recorded with an audio mode other than [

12bit].

CHECK THE CASSETTE [BLANK]

- You attempted to dub audio (

66) on a tape with a blank section.

CHECK THE CASSETTE [INCORRECT TAPE SPECIFICATION]

- You attempted to dub audio (

66) on a tape recorded in HD (high definition) standard.

CHECK THE CASSETTE [REC MODE]

- You attempted to dub audio (

66) on a tape recorded in a recording mode other than SP.

CHECK THE INPUT

- The DV cable is not correctly connected to the DV terminal (

62), or the connected digital device is turned

off.

- The video input signal is in a different television system (PAL or SECAM).

CONDENSATION HAS BEEN DETECTED

- Condensation has been detected in the camcorder (

CONDENSATION HAS BEEN DETECTED REMOVE THE CASSETTE

- Condensation has been detected in the camcorder (

89). Remove the cassette.

- You attempted to dub a copyright protected tape (